• Tag Archives Philco
  • Philco 48-214 Part 1

    First Part of the restoration process has been completed for this classic AM radio. All pieces have been removed from the case, including the grill clothe and plastic dial cover. So far I have put in about 4 hours to get to this point over the past few weeks to take apart, sand and order parts and supplies.

    Cost so far has been —

    Decal – $6.95

    parts + S&H ~$27.00

    sandpaper ~$9.00

    —————————–

    total so far $42.95

     

    still need the wood stain, polyurethane, white latex/oil paint, and brushes, also any other components that need replacing.

     

    Parts ordered from mouser, BOM-philco-48-214 (spreadsheet).

    Decal ordered from Vintage Radio Labels.

    Sandpaper was bought at Meijer.

    circuit diagram and repair guide from Nostalgia Air.

     

    wpid-2014-11-08-20.21.08.jpg.jpeg

    wpid-2014-11-08-20.22.09.jpg.jpeg

     

    Next steps, re-cap the radio, stain, sand, paint and coat the case, find a suitable grill cloth, since the one that it came with is a little stretched because someone, decided to poke it too hard.

    So far so good.


  • Winter project Philco 48-214 AM Tube Radio

    Hello, been awhile.
    I finally have some time to work on projects, and this one can be incremental where I can put 5 mins here, or 10 mins there to work on this. My goal is to restore this radio to working condition, replace all the old capacitors, refinish the wooden cabinet, and replace the speaker clothe.

    I have already started to strip and sand the cabinet, and I have found decals to replace the Philco Transitone decal that’s on the front.

    So far I am really looking forward to finish this by Christmas.